Properties of textile fibres (Part 2).

Properties of textile fibres.

Esthetic factor.

Silk is an outstanding example with good esthetic properties. Filament acetate ranks next. Polyesters appear wool like and are most pleasing.

Example of esthetic.

Comfort.

Comfort of fibre is most important but little understood property. It is related to the structure of the fabric in determining it's ventilation and heat insulating characteristics and twisting properties. The comfort is not, however, depend on high moisture absorption in the fabric.

Crease resistance.
The polyester, nylon and acrylics are good in this respect. Cellulosics are not good in crease resistance, however they may be modified by resin finishes to give good crease resistance.

Example of crease.

Fabric stability.

The stability of shape and dimension of synthetic fibres are outstandingly good. Wool retain well shape in garments but shrinks on wet treatment. A phenomenon called pilling is important in synthetics. A nodule or pill is formed on rubbing the fibre as the surface raise and tangled. These pill wear off in wool but do not break away in polyesters and appears quite unsightly.

Example of pills.

Wear resistance.

No laboratory test is for abrasion of fibre in actual used. However there are two or more independent factors on which abrasion of fibre depends. Acetate rayon is abraded most easily, followed by viscose, cotton and wool, while the polyesters, acrylics and nylon are progressively better.

Example of wear.

Properties of textile fibres part 1

Comments

Difference between organic and inorganic polymers.

Difference between organic and inorganic polymers. Definition Organic polymers are the polymers that essentially contain carbon atom in the backbone. Inorganic polymers are the polymers that have no carbon atom in the backbone. Structure Most organic polymers have simple structures. Almost all inorganic polymers are highly branched and have complex structures. Electrical Conductivity In most of the aqueous solutions, organic polymers are typically poor conductors of electricity and heat. Inorganic polymers in aqueous solutions are good conductors of electricity, this is because they have high ability to ionise and this makes them better conductors. Flammability Organic polymers are flammable whereas inorganic polymers are nonflammable. Effect on nature Organic polymers are environmental friendly as these are biodegradable. Inorganic polymers are not environmental friendly as these are non biodegradable. Examples Organic polymers include polysaccharide...

Monomers.

Monomers. A monomer is a molecule that can be reacted together with other monomer molecules to form a larger polymer chain. Some monomers are given below with their polymers . Tetrafluoroethene ; Tetrafluoroethene is the monomer of Teflon . Teflon and its monomer. Acrylonitrile (vinyl cyanide); Acrylonitrile is the monomer of Polyacrylonitrile . Polyacrylonitrile and its monomer. Isoprene; Isoprene is the monomer of Polyisoprene (natural rubber). Polyisoprene and its monomer. Chloroprene; Chloroprene is the monomer of Neoprene . Neoprene and its monomer. Vinyl chloride; Vinyl chloride is the monomer of Poly(vinyl chloride) . Polyvinyl chloride and its monomer. Vinyl acetate; Vinyl acetate is the monomer of Poly(vinyl acetate). Poly(vinyl acetate) and its monomer. Propylene; Propylene is the monomer of Polypropylene . Polypropylene and its monomer. Styrene; Styrene is the monomer of Polystyrene . Polystyrene and i...

Determination of molecular weight of polymers by viscosity method.

Determination of molecular weight of polymers by viscosity method. It is a simple method for determining the molecular weight of polymers. Addition of polymers in the solvent increases the viscosity of the solvent, due to introduction of inhomogeneities by the polymers. If η₀ is the viscosity of the solvent and η is the viscosity of the solution at the same temperature, then the relative viscosity is given by Relative viscosity. Specific viscosity: It is defined as the relative increase in viscosity and is given as Specific viscosity. Reduced viscosity: It is defined as the relative increase in viscosity per unit concentration (C) of polymer and is given as Reduced viscosity. Intrinsic viscosity: The reduced viscosity is dependent on concentration (C). If a graph is plotted between reduced viscosity vs concentration then the extraplotation value when C=0 is called intrinsic viscosity. Intrinsic viscosity. Graph of reduced vi...

Polymers

Search This Blog